ISO 868 塑料和硬質膠.用硬度計測定針入硬度[肖氏(SHORE)硬度]—標準名稱

ISO 868 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)

ISO 868塑料和硬質膠.用硬度計測定針入硬度[肖氏(SHORE)硬度]

ISO 868 塑料和硬質膠.用硬度計測定針入硬度[肖氏(SHORE)硬度]—適用范圍

This International Standard specifies a method for the determination of the indentation hardness of plastics and ebonite by means of durometers of two types: type A is used for softer materials and type D for harder materials (see the Note to 8.2). The method permits measurement either of the initial indentation or of the indentation after a specified period of time, or both.

ISO 868 塑料和硬質膠.用硬度計測定針入硬度[肖氏(SHORE)硬度]—引用文件

ISO 291 Plastics — Standard atmospheres for conditioning and testing

ISO 868 塑料和硬質膠.用硬度計測定針入硬度[肖氏(SHORE)硬度]—相關標準

ASTM D2240橡膠特性的標準試驗方法.肖氏硬度/Standard Test Method for Rubber Property8212;Durometer Hardness

ISO 48-4硫化橡膠或熱塑性橡膠.硬度的測定.第4部分:硬度計法壓痕硬度(肖氏硬度)/Rubber, vulcanized or thermoplastic — Determination of hardness — Part 4: Indentation hardness by durometer method (Shore hardness)

GB/T 531.1硫化橡膠或熱塑性橡膠 壓入硬度試驗方法 第1部分_邵氏硬度計法(邵爾硬度)/Rubber , vulcanized or thermoplastic— Determination of indentation hardness — Part 1 : Duromerer method (Shore hardness)

GB/T 30308氟橡膠 通用規范和評價方法/Fluoroelastomers—General specification and procedure of evaluation

GB/T 30308

IS K6253-3硫化橡膠或熱塑性橡膠硬度測定.第3部分:硬度計法/Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 3: Durometer method

JIS k7312熱固性聚氨酯彈性體模塑制品的物理試驗方法/Physical testing methods for molded products of thermosetting polyurethane elastomers

ISO 868塑料和硬質膠.用硬度計測定針入硬度[肖氏(SHORE)硬度]/Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)

GB T 2411塑料和硬橡膠 使用硬度計測定壓痕硬度（邵氏硬度）/Plastics and ebonite-Determination of indentation hardness by means of a durometer(shore hardness)

DIN ISO 7619-1硫化橡膠或熱塑性橡膠.壓痕硬度的測定.第1部分:硬度計法(肖氏硬度) /Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)

AS 1683.15.2人造橡膠的測試方法 硬度計法/Methods of test for elastomers - Durometer hardness