ASTM D3149 Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
ASTM D3149電絕緣用交聯(lián)聚烯烴熱收縮管的標準規(guī)范
This specification covers flexible and semirigid crosslinked polyolefin heat-shrinkable tubing used for electrical insulating purposes. It is in its expanded form and will shrink to its extruded diameter when heated. The tubing has been classified into four types according to flame retardancy, flexibility, opaqueness, and secant modulus: Type I, Type II, Type III, and Type IV. The compound used in the manufacture of heat-shrinkable tubing shall be modified polyolefin resin, and the finished compound shall be free of all foreign matter other than intended formulation additives as appropriate. The tubing shall be extruded, cross-linked, and then expanded to the required dimensions. The following chemical properties of the material shall be determined: corrosion, fluid resistance, flammability, and water absorption. Physical properties of tubing like restricted shrinkage, dielectric strength, heat shock, low-temperature flexibility, tensile strength, elongation, heat resistance, color, color stability, specific gravity, volume resistivity, secant modulus, copper contact corrosion, and copper stability shall be determined.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1. Scope
DESIG: D3149 06 ^TITLE: Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation ^SCOPE:
1. Scope
1.1 This specification covers flexible and semirigid crosslinked polyolefin heat-shrinkable tubing used for electrical insulating purposes. It is supplied in an expanded form and will shrink to its extruded diameter when heated.
Note 1
This standard is similar to but not identical to IEC 60684-3-209, -211 and -212.
1.2 The values stated in inch-pound units are to be regarded as the standard except temperature, which shall be stated in degrees Celsius. Values in parentheses are for information only.
2. Referenced Documents (purchase separately)
ASTM Standards
D910 Specification for Aviation Gasolines
D1711 Terminology Relating to Electrical Insulation
D2671 Test Methods for Heat-Shrinkable Tubing for Electrical Use
D3636 Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
E176 Terminology of Fire Standards
D1711 Terminology Relating to Electrical Insulation
D2671 Test Methods for Heat-Shrinkable Tubing for Electrical Use
D3636 Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
E176 Terminology of Fire Standards
Military Standards
MIL-A-8243 Anti-Icing and De-Icing Defrosting Fluid
Federal Standards
SS-S-550 Sodium Chloride, Technical, for Water-Softening Units
IEC Standards
Index Terms
crosslinked polyolefin heat-shrinkable tubing; electrical insulation; heat-shrinkable tubing; polyolefin;
