EN 60695-2-10灼熱絲的測試方法–標準名稱
EN 60695-2-10: Fire Hazard Testing - Part 2-10: Glowing/Hot-Wire Based Test Methods - Glow-Wire Apparatus and Common Test Procedure
EN 60695-2-10：防火測試－第2-10部分：灼熱金屬線/熱線的測試方法－灼熱金屬線儀器和通用測試流程
EN 60695-2-10灼熱絲的測試方法–標準概述
IEC 60695的這一部分規定了模擬發熱元件或過載電阻等熱源在短時間內可能產生的熱應力效應的發光絲設備和通用測試程序，以便通過模擬技術來評估火災危險。標準中描述的測試程序是一種用于小規模測試的通用測試程序，在該測試中，將標準化的電熱絲用作點火源。
它是用于最終產品和固體電氣絕緣材料或其他固體可燃材料的測試程序的一個常見部分。
Scope:
This part of IEC 60695 specifies the glow-wire apparatus and common test procedure to simulate the effects of thermal stresses which may be produced by heat sources such as glowing elements or overloaded resistors, for short periods, in order to assess the fire hazard by a simulation technique.
The test procedure described in this standard is a common test procedure intended for the small-scale tests in which a standardized electrically heated wire is used as a source of ignition. It is a common part of the test procedures applied to end products and to solid electrical insulating materials or other solid combustible materials.
A detailed description of each particular test procedure is given in the respective standards IEC 60695-2-11, IEC 60695-2-12 and IEC 60695-2-13.
EN 60695-2-10灼熱絲的測試方法–引用標準
IEC 60695-2-11, Fire hazard testing-Part 2-11: Glowing/hot-wire based test methods Glow-wire flammability test method for end-products
IEC 60695-2-11防火測試，第2-11部分：基于灼熱/熱線的試驗方法
IEC 60695-2-12, Fire hazard testing-Part 2-12: Glowing/hot-wire based test methods Glow-wire flammability index (GWFl) test method for materials
IEC 60695-2-12防火測試，第2-12部分：灼熱絲/熱絲基測試方法材料的灼熱絲可燃性指數（GWFl）測試方法
